Lab 3 Native IP Multicast Workshop

4. Configure the PIM Rendezvous Point on the Juniper M10
   heanet@juniper> edit
   [edit]
   heanet@juniper# edit protocols pim
   [edit protocols pim]
   heanet@juniper# set rp static address 193.1.195.68
   

5. Enable PIM on the Juniper Sonnet and Fast Ethernet Interfaces.
   [edit protocols pim]
   heanet@juniper# set interface so-0/0/1 mode sparse
   heanet@juniper# set interface ge-1/0/0 mode sparse

6. Commit your configuration to get it to take affect.
   [edit interfaces]
   heanet@juniper# commit